Error processing SSI file
LEADTOOLS Annotations (Leadtools.Annotations assembly)

Show in webframe

Save(Stream,AnnContainer[],AnnCodecsFormat) Method






The stream to which to save the array of AnnContainer.
An array of AnnContainer containing the objects to be saved.
An AnnCodecsFormat value that specifies the annotation format to use when saving.
Saves an array of AnnContainer to a stream.
Syntax
public void Save( 
   Stream stream,
   AnnContainer[] containers,
   AnnCodecsFormat format
)
'Declaration
 
Public Overloads Sub Save( _
   ByVal stream As Stream, _
   ByVal containers() As AnnContainer, _
   ByVal format As AnnCodecsFormat _
) 
'Usage
 
Dim instance As AnnCodecs
Dim stream As Stream
Dim containers() As AnnContainer
Dim format As AnnCodecsFormat
 
instance.Save(stream, containers, format)

            

            
public:
void Save( 
   Stream^ stream,
   array<AnnContainer^>^ containers,
   AnnCodecsFormat format
) 

Parameters

stream
The stream to which to save the array of AnnContainer.
containers
An array of AnnContainer containing the objects to be saved.
format
An AnnCodecsFormat value that specifies the annotation format to use when saving.
Remarks

This method saves the entire array of AnnContainer to a stream that will contain multipage pages, with each page corresponding to one of the AnnContainer. If stream contains any data, it will be overwritten. If containers contain many AnnContainer, then this method will create the multipage annotation stream much faster than repeated calls to Save(Stream,AnnContainer,AnnCodecsFormat,Int32,AnnCodecsSavePageMode)

This method only supports the AnnCodecsFormat.Xml format. All other AnnCodecsFormat are not supported.

For more information, refer to Annotation Files.

Example
Copy Code  
Imports Leadtools
Imports Leadtools.Annotations
Imports Leadtools.Codecs
Imports Leadtools.WinForms

Public Sub AnnCodecs_SaveStream2()
    ' create three  annotation containers
    ' The first container contains a rectangle object
    Dim container0 As New AnnContainer()
    Dim rectObj As New AnnRectangleObject()
    rectObj.Bounds = New AnnRectangle(100, 100, 100, 100, AnnUnit.Pixel)
    rectObj.Pen = New AnnPen(Color.Blue, New AnnLength(1, AnnUnit.Pixel))
    rectObj.Brush = Nothing
    container0.Objects.Add(rectObj)

    ' The second container contains a line object
    Dim container1 As New AnnContainer()
    Dim lineObj As New AnnLineObject()
    lineObj.StartPoint = New AnnPoint(100, 100, AnnUnit.Pixel)
    lineObj.EndPoint = New AnnPoint(200, 200, AnnUnit.Pixel)
    lineObj.Pen = New AnnPen(Color.Red, New AnnLength(1, AnnUnit.Pixel))
    container1.Objects.Add(lineObj)

    ' The third container contains a ellipse object
    Dim container2 As New AnnContainer()
    Dim ellipseObj As New AnnEllipseObject()
    ellipseObj.Bounds = New AnnRectangle(100, 100, 100, 100, AnnUnit.Pixel)
    ellipseObj.Pen = New AnnPen(Color.Blue, New AnnLength(1, AnnUnit.Pixel))
    ellipseObj.Brush = Nothing
    container2.Objects.Add(ellipseObj)

    ' create a memory stream to save both annotation containers
    Using ms As New MemoryStream()
        ' create a new AnnCodecs class
        Dim codecs As New AnnCodecs()

        ' save both AnnContainers into the stream
        codecs.Save(ms, container0, AnnCodecsFormat.Xml, 1, AnnCodecsSavePageMode.Overwrite)
        ms.Seek(0, SeekOrigin.Begin)

        codecs.Save(ms, container1, AnnCodecsFormat.Xml, 2, AnnCodecsSavePageMode.Insert)
        ms.Seek(0, SeekOrigin.Begin)

        ' Now load both containers from the stream, and verify that there are two containers
        Dim containersTwo() As AnnContainer = codecs.Load(ms)
        MessageBox.Show(String.Format("After Load: there should be 2 containers.  Total number of containers: {0}", containersTwo.Length))

        ' Add another container, and save to the stream
        Dim containersNew(containersTwo.Length) As AnnContainer
        Array.Copy(containersTwo, containersNew, containersTwo.Length)
        containersNew(2) = container2
        ms.Seek(0, SeekOrigin.Begin)

        codecs.Save(ms, containersNew, AnnCodecsFormat.Xml)
        ms.Seek(0, SeekOrigin.Begin)

        ' Load and verify that there are three containers
        Dim containersThree() As AnnContainer = codecs.Load(ms)
        MessageBox.Show(String.Format("After Load: there should be 3 containers.  Total number of containers: {0}", containersThree.Length))
    End Using
End Sub
using Leadtools;
using Leadtools.Annotations;
using Leadtools.Codecs;
using Leadtools.WinForms;

public void AnnCodecs_SaveStream2()
{
   // create three  annotation containers
   // The first container contains a rectangle object
   AnnContainer container0 = new AnnContainer();
   AnnRectangleObject rectObj = new AnnRectangleObject();
   rectObj.Bounds = new AnnRectangle(100, 100, 100, 100, AnnUnit.Pixel);
   rectObj.Pen = new AnnPen(Color.Blue, new AnnLength(1, AnnUnit.Pixel));
   rectObj.Brush = null;
   container0.Objects.Add(rectObj);

   // The second container contains a line object
   AnnContainer container1 = new AnnContainer();
   AnnLineObject lineObj = new AnnLineObject();
   lineObj.StartPoint = new AnnPoint(100, 100, AnnUnit.Pixel);
   lineObj.EndPoint = new AnnPoint(200, 200, AnnUnit.Pixel);
   lineObj.Pen = new AnnPen(Color.Red, new AnnLength(1, AnnUnit.Pixel));
   container1.Objects.Add(lineObj);

   // The third container contains a ellipse object
   AnnContainer container2 = new AnnContainer();
   AnnEllipseObject ellipseObj = new AnnEllipseObject();
   ellipseObj.Bounds = new AnnRectangle(100, 100, 100, 100, AnnUnit.Pixel);
   ellipseObj.Pen = new AnnPen(Color.Blue, new AnnLength(1, AnnUnit.Pixel));
   ellipseObj.Brush = null;
   container2.Objects.Add(ellipseObj);

   // create a memory stream to save both annotation containers
   using (MemoryStream ms = new MemoryStream())
   {
      // create a new AnnCodecs class
      AnnCodecs codecs = new AnnCodecs();

      // save both AnnContainers into the stream
      codecs.Save(ms, container0, AnnCodecsFormat.Xml, 1, AnnCodecsSavePageMode.Overwrite);
      ms.Seek(0, SeekOrigin.Begin);

      codecs.Save(ms, container1, AnnCodecsFormat.Xml, 2, AnnCodecsSavePageMode.Insert);
      ms.Seek(0, SeekOrigin.Begin);

      // Now load both containers from the stream, and verify that there are two containers
      AnnContainer[] containersTwo = codecs.Load(ms);
      MessageBox.Show(String.Format("After Load: there should be 2 containers.  Total number of containers: {0}", containersTwo.Length));

      // Add another container, and save to the stream
      AnnContainer[] containersNew = new AnnContainer[containersTwo.Length + 1];
      Array.Copy(containersTwo, containersNew, containersTwo.Length);
      containersNew[2] = container2;
      ms.Seek(0, SeekOrigin.Begin);

      codecs.Save(ms, containersNew, AnnCodecsFormat.Xml);
      ms.Seek(0, SeekOrigin.Begin);

      // Load and verify that there are three containers
      AnnContainer[] containersThree = codecs.Load(ms);
      MessageBox.Show(String.Format("After Load: there should be 3 containers.  Total number of containers: {0}", containersThree.Length));
   }
}
Requirements

Target Platforms

See Also

Reference

AnnCodecs Class
AnnCodecs Members
Overload List

Error processing SSI file
(Deprecated, use Leadtools.Annotations.Core instead)